Zeatz U.K. PH - Large (450 to 3500mm) Horizontally Mounted CNC Rotary Tables
Back
PH Options
PH Price List
Product Introduction and Design Features

The PH product is a horizontally mounted full CNC rotary table. It ranges in size from 450mm - 4,000mm diameter and is perfectly suited to any large rotary application.

This product has been recently re-designed updated some of the features of the earlier PH models.

The backbone of the all new PH rotary tables are the recently incorporated wire race bearings. These large diameter precision ground bearings provide the high loading characteristics and enable the table to accommodate extreme moment loads.

Large diameter wire race bearings allow the unit to accept both large axial and moment loadings

PH Bearing Cross Section

The clear glass design of the FP pack allows easy detection of oil loss.  The pump unit can be mounted either directly onto the motor cover or on the opposite side.

Integrated hydraulic power unit

The integral hydraulic clamping system consists of 3 dual clamping shoes (2 on the PH-450 model), locking the outside diameter of the worm wheel. Each clamp shoe can be individually controlled to maximise its performance. The system is fed by a specially prepared HAWE FP electric clamping pump (where fitted). The HAWE pump has been specially selected with an innovative clear tank design to monitor the oil levels. The system also incorporates all required switching and monitoring functions required by the target machine control system.

The table can be fitted with different faceplate variations as standard. Without any machining, various centres can be added to assist component location. Location spigot, location recess, Morse / ISO / HSK taper are just some of the standard centres that can be interchanged for different applications. An independent 4 jaw chucking system can also be integrated into the T-slots of the table enabling component clamping. For hydraulic fixturing mounted on the table a thru hole / hydraulic coupling can supply any number of services thru the table. (To view more information regarding the optional faceplates for the PH please click here)

3 equally spaced (2 on the PH-450) clamping shoes hold directly on the outer diameter of the worm wheel resulting in highly effective clamping.

Three clamp shoes equally spaced around the circumference of the main wormwheel.

Mounting positions on 3 sides of the table allow the table to be fixed into any orientation and multi-direction location keys in the base allow the table to be orientated into any desired position.

A high accuracy direct axis encoder combined with low run-out bearings provide the table with very accurate positioning and repeatability. This high accuracy is still available with either the thru hole or hydraulic coupling option.

Dimensional Chart and Technical Specification - All dimensions are in millimeters

Model No.
PH-450
PH-600
PH-800
PH-1000
PH-1250
PH-1500
PH-2000
Dimensions
A
450
600
800
1,000
1,250
1,500
2,000
B
240
340
400
500
650
750
1,000
C
185
220
313
406
510
610
760
D
183
233
305
405
510
635
760
E (i)
383
473
485
580
730
935
1,060
F
200
240
270
320
400
420
450
G
245
300
350
420
510
540
570
H
16
18
18
22
22
22
22
J
18
18
22
22
22
22
22
Technical Specification
Indexing Accuracy (arc secs)(ii)
5
3.6
3.6
3.6
3.6
3.6
3.6
Repeating Accuracy (arc secs)(ii)
2.5
1.8
1.8
1.8
1.8
1.8
1.8
Min Increment (deg)
0.001
0.001
0.001
0.001
0.001
0.001
0.001
Locking System
Hydraulic
Hydraulic
Hydraulic
Hydraulic
Hydraulic
Hydraulic
Hydraulic
Locking Pressure (bar)
150
150
150
150
150
150
150
Clamping Force (Nm)
12,500
25,000
30,000
30,000
30,000
30,000
50,000
Load Capacity (kg) (iv)
1,000
2,000
4,000
6,000
12,000
16,000
20,000
Gear Ratio (Final Drive)
180:1
270:1
270:1
360:1
360:1
360:1
360:1
Net Weight (kg)
240
600
800
1,550
2,950
3,850
7,100
Rotational Torque (Nm) (iii)
1,152
2,592
3,456
4,752
7,776
9,504
10,656
Max Rot. Speed (rpm) (iii)
22.0
16.0
16.0
12.0
10.0
8.0
8.0

For the latest information on PH models beyond the 2000mm range please e-mail us at enquiries@zeatz.com and we will send you relevant technical information and competitive prices. For information regarding CNC products of the horizontal / vertical style ranging from 350mm - 2000mm please click here.

Notes and Specification Disclaimer

(i) depending upon motor and cable model / type selected. (ii) requires 18,000 - 36,000 line direct axis measurement available on all thru bore types. (iii) Figures shown here are dependent on the gear ratio and motor type selected. (iv) based in centrally loaded components only.

Disclaimer - Information displayed on this site and otherwise supplied to users is based on our general experience and given in good faith, but because of factors which are outside our knowledge and control, and affect the use of the products, no warranty is given or to be implied with respect to such information. Specifications and dimensions are subject to change without prior notice.

Dimensional Drawing (for models 450mm-2000mm)

For a more detailed and clearer drawing please contact the sales department at Zeatz U.K.

(All dimensions are in millimeters)

Zeatz U.K. Manufacturing

Please click on the appropriate contact details

To the Top